Read our welding articles.
• Features full remote and multi-process capability – stick, Touch-Start® TIG, MIG, flux-cored and arc gouging.
• 5-570 amp output range for all recommended processes is low enough for TIG welding on thin sheetmetal and robust enough for arc gouging with a 3/8" carbon.
• 88% efficiency with a high 95% power factor – the V450-PRO inverter platform helps you dramatically lower energy consumption to pocket real savings.
• Add the Advanced Process Panel Kit for access to Pulsed MIG and a host of Lincoln Nextweld® arc performance innovations that allow you to tailor the arc, including: Pulse-on-Pulse®, Power Mode® and Waveform Control Technology®.
• Standard Controls include:
– Selectable Hot Start for stick welding: Turn it down for thin material or turn it up to overcome cold starting at the beginning of a weld.
– Variable Arc Control: Dial in the “soft” or “crisp” arc characteristics you want for each application.
• Touch-Start® TIG makes it easy to achieve great arc starts with minimal or no tungsten contamination.
• Clever stackable case design allows you to stack up to three units to save valuable shop floor space.
• Supports 24, 42 or 115 VAC wire feeders.
• Heavy-duty construction, robust engineering and rigorous testing result in tough IP23S rating for use in industrial environments.
• Front panel 15 amp 115 volt AC auxiliary power receptacles with circuit breaker protection will power your lights, grinders or gun/torch water coolers.
• Easy-access front panel controls and connections are protected by sturdy metal doors.
• Three year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.
• Free system updates available at PowerWaveSoftware.com
• 5-570 amp output range for all recommended processes is low enough for TIG welding on thin sheetmetal and robust enough for arc gouging with a 3/8" carbon.
• 88% efficiency with a high 95% power factor – the V450-PRO inverter platform helps you dramatically lower energy consumption to pocket real savings.
• Add the Advanced Process Panel Kit for access to Pulsed MIG and a host of Lincoln Nextweld® arc performance innovations that allow you to tailor the arc, including: Pulse-on-Pulse®, Power Mode® and Waveform Control Technology®.
• Standard Controls include:
– Selectable Hot Start for stick welding: Turn it down for thin material or turn it up to overcome cold starting at the beginning of a weld.
– Variable Arc Control: Dial in the “soft” or “crisp” arc characteristics you want for each application.
• Touch-Start® TIG makes it easy to achieve great arc starts with minimal or no tungsten contamination.
• Clever stackable case design allows you to stack up to three units to save valuable shop floor space.
• Supports 24, 42 or 115 VAC wire feeders.
• Heavy-duty construction, robust engineering and rigorous testing result in tough IP23S rating for use in industrial environments.
• Front panel 15 amp 115 volt AC auxiliary power receptacles with circuit breaker protection will power your lights, grinders or gun/torch water coolers.
• Easy-access front panel controls and connections are protected by sturdy metal doors.
• Three year warranty on parts and labor.
• Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.
• Free system updates available at PowerWaveSoftware.com
