This kit allows installation of the Hobart DP-3035-10 Spoolgun to Hobart Handler  135, Handler 175, Handler 140, Handler 180 and Handler 187  from Serial# LC175022 ( with the 2 pin square drive motor plugs)

Installation time is approx 30-45  minutes,. required drilling 2  holes in the inside case ( where the wire spool is so as to install a toggle switch for selection of spoolgun or regular operation and a 4 pin gun receptacle . Hooking up 4 pins on the 4 pin trigger plug on the front case and unpluging the drive motor and hooking it into the toggle switch plugs , putting trigger wires and motor feed wires on the 4 pin trigger plug. 

There is no warranty expressed or implied as this application is not recommended by the manufacturer . The newer Handler 210  machines have a fold back circuit on the pc board for protection in case the gun gets shorted.

We have installed the Hobart DP-3035 on the above machines and have had no problems .

B & R & Miller also assumes no liability or warranty in cases of misuse or improper installation of this product.

B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
WHITE PLAINS, MD 20695
800-783-3073    FAX 301-934-3057
Hours : Mon-Fri 8-5   Sat 9-12 EST
    Email questions to : 
                                     

 All products are brand new , not rebuilt ,not reconditioned and carry a full manufactures warranty.
 Unless otherwise specified

Payment Paypal, all major credit cards. Payment must be received within 5 days of purchase. Fees Maryland  sales tax of 6 % charged on all orders shipped to or picked up in Maryland. Shipping Most items include free shipping to 48 states, check listing for the FREE SHIPPING. . Large welders require truck shipment to your door. You must get them off the truck.We can arrange for a lift gate if you request it. A daytime phone number is required  .Some one must be there for truck freight deliveries.  We ship all items under 110# UPS or FexEx ground service. You can choose1st OR 2nd day at additional charge, send email or call for cost. WE DO  SHIP VIA USPS for some small items  to an APO box which there is a $ 15-$ 75 surcharge on all items. We will not ship to a freight fowarder unless other payment arrangements are made , no credit cards on orders to freight fowarders or third party shippers. Delivery We will usually ship your item the same day or next business day after receiving payment. Some weekend and holiday purchases may go out on Monday or Tuesday do to heavy volume. You will be notified immediatly if your item is on back-order. Some listing clearly list lead time for delivery, read carefully. . Warranty All warranties are thru the manufacturer Contact Me Email brwelder@radix.net  Phone 800-783-3073 5 DAYS A WEEK 8:00 AM - 5:00 PM EST And Sat  9-12. Some questions and special shipping requirements may take a day or so. We try to return all calls during business hours within one hour or less. Emails sometimes can take a little longer, but will be answered as fast as we can. Warranty   - All warranties are thru the manufacturers. We will help you with calling the manufacturer or  receipts.

We are an AUTHORIZED MILLER -HOBART-ONAN-ACE FUME ECTRACTORS -ARCAIR DISTRIBUTOR.
We have been serving the welding industry for over 25 years. So buy with confidence! B & R  Welding
 Supplies is family owned and operated. You can speak with a real person at any time for technical
questions or help in the application processes.
Free Shipping to the lower 48 stateson most items  

We accept all forms of payment including credit cards and PayPal.   Feel free to call our office direct
 at 1-800-783-3073 to use your credit card and speak with a live person Monday through Friday 8AM to 5PM 
and Sat 9 AM to 12 PM EST .

Online payment are by Visa , MasterCard,Discover , American Express , or PayPal.  B & R  only accepts U.S. billed
 credit cards, and requires both a billing address & V-code verification in order to accept a credit card. No C.O.D.
orders or “purchase orders” are accepted. On Paypal we only ship to a verified Paypal address . You can set up a
second paypal address for shipments , this must be verified by Paypal.

B & R  requires signature on all machines, as well as packages with a total value exceeding $500. You may
 request that your delivery signature requirement be waived by entering a special request in the the form of
an email to brwelder@radix.net  .  B & R  cannot take responsibility for missing or damaged packages delivered
 without a signature at the request of the customer.

External damage to all packages must be refused and B & R must be contacted immediately. Internal damage
must be reported to B & R  within 5 days of receipt. Damage claims will be refused if the item has been used, is
 not in original packaging, or was received more than 5 days earlier.

A 6 % Sales tax for customers is charged to Maryland shipping addresses only.

Alaska or Hawaii Shipments:
GROUND UNDER 150 lbs. - shipping charges will be quoted separately via phone or email.
AIR UNDER 150 lbs. - MUST ship either Next Day or Second Day Air and shipping charges
GROUND OR AIR OVER 150 lbs. - shipping charges will be quoted separately via phone or email.

B & R does not ship to Canada .

B & R cannot ship to a P.O. Box , we need a physical address  to ship to , by not providing
one delays your order .

Air/Express Shipments: Next Day, Second Day or Three Day Air, on orders UNDER 150 lbs  and TOTAL air shipments
OVER 150 lbs. will be quoted separately via phone or email.   800-783-3073 .

B & R  Welding Supplies is located at 4412 Southern Business Park Drive , White Plains, Maryland, 20695 . 
Fax  301-934-3057  - Phone  800-783-3073 --  email brwelder@radix.net & brweldingsupplies@yahoo.com .