Hobart Handler 125 Wire-Feed Welder — 115 Volt, 125 Amp, Model# 500487

In Stock

Ship Wt. 55.0 lbs.

Item# 164795

Description

Rugged and portable, the Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035in. flux cored wire. This unit has an optional solenoid valve for welding with 0.023–0.030in. solid wire and gas shielding (when used with MIG Conversion Kit item# 164796). Use C-25 gas (75% argon/25% C02) on 22-gauge, 1/8in. steel for cleaner weld with less spatter. Use Tri-Max gas and stainless steel wire for welding on 16- to 12-gauge stainless steel. MIG gas upgrade kit available for greater versatility (see Item# 164796). U.S.A.

Key Specs

• Volts: 115
• Amps: 125
• Duty Cycle: 20% at 90 Amps, 19V
• Mig Ready: No, requires MIG conversion kit
• Wire Feed Speed Control: Yes, 0 - 500 IPM
• Weldable Metals: Steel and stainless steel
• Weld Thickness (in.): 18-gauge to 3/16in. steel
• Clamp Cable Length (ft.): 10
• Regulator and Gas Hose Included: No
• Shielding Gas Required: No
• Welding Wire Diameter (in.): 0.023 -0.035
• Cart: No
• Dimensions L x W x H (in.): 9 7/8 x 12 1/8 x 16 7/8

General Specs

• Comfortable H-9 gun with liner for 0.023-0.035in. wire
• Welds up to 3/16in. steel with flux core wire
• Three 0.030in. contact tips
• 1 lb. spool of 0.030in. self-shielding flux cored wire
• Spool shaft to accommodate 4in. spools
• Weld setup cart
• Amperage output: 30–125 Amps
• Maximum open circuit voltage: 29V
• Wire feed speed range: 0–415 IPM (0–11 MPM); 0–500 IPM (0–13 MPM) at no load
• Built-in contactor makes wire electrically "cold" until trigger is pulled
• Self-reseting thermal overload
• Model 500487
  
  5/3/1 Industrial Warranty
  5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes
• 3-year warranty on drive systems, PC boards, switches and controls
• 1-year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days
• Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty
• Engine warranty is provided by the engine manufacturer