Miller 907404 Spectrum 625 X-Treme Plasma Cutter 12 FT
: Item Description :
Receive $75.00 Mail in rebate from Miller with purchase of Spectrum 625 X-treme and Miller In-Line Air Filter Kit
Miller Electric # 907404 Spectrum 625 X-Treme Plasma Cutter Portable - Cut up to 5/8" mild steel in the shop or at the job site - at 21 pounds, the shoulder strap allows the user to easily move from location to location. High Performance Cooling System with Fan-On-Demand. High Performance Thermal Management System features new high-speed fan which only operates when torch trigger is engaged for improved reliability. X-CASE provides ultimate protection during transport and storage. Additional space ideal for consumable box, as well as gloves, eye protection, etc. Can be powered by any Miller engine drive with generator power at or above 8 kW (e.g. Bobcat) or equivalent competitive equipment. Automatic Air Regulation - The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance. Automatic Consumable Detection - detects consumable type installed and adjusts gas pressure to optimize cutting performance, eliminating the need for a manual regulator. Auto-Refire Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal - all automatically! No need for manual re-triggering which reduces user hand fatigue. Auto Postflow calculates the length of postflow time based on the amount of cutting time to optimize consumable life and eliminate excessive air usage. LED indicators for power, pressure, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime. Lower purchase and operating costs for the same cutting power and performance. The 40 Amp Spectrum 625 X-TREME provides similar mild steel cutting speeds as higher amperage competitive models. The Spectrum 625 X-TREME more efficiently uses power in the cutting arc to deliver faster cutting speeds at lower output amperages and draw less power from the wall. LVC line voltage compensation provides peak performance power under variable conditions (187 to 264 volts) for steady and cleaner ending cuts. Wind Tunnel Technology
Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit. ProcessSpecificationsCutting Capability - Rated: 5/8 in at 12 IPM*
- 1/4" at 60 IPM*
*Inches Per Minute Input Power Required Input Pressure/Flow - 6.0 SCFM (170 L/min.) at 90 PSI MIN (621 kPa) 120 PSI MAX (828 kPa)
Rated Output at 104 F (40C) - 40 A at 140 VDC, 50% duty cycle
Net Weight with torch
Product Code: MI907404
|
Read our welding articles.
