Welding List
Find new and used welding equipment (home)


Read our welding articles.


FREE SHIPPING IN THE 48 STATES
go back

MILLER SPECTRUM 375 PLASMA CUTTER 903891

Click Here to Bid or Purchase
Category:Business & Industrial:Manufacturing & Metalworking:Welding:Welders
Current Price:1,160.00 USD
Ends:August 14, 2010, 16:53 GMT

 


 

MILLER SPECTRUM 375 PLASMA CUTTER
PART # 903 891
BRAND NEW
FREE SHIPPING
 

Solid state design and Miller's reliable technology pack a ton of performance into the portable, 49 pound Spectrum 375 CutMate.  This versatile power source adapts to the shop or work site by operating on either 115 or 230 volt AC power.  This machine can cut 1/2 inch mild steel with a stand off, and can drag cut 3/8 inch mild steel.  With new features such as the Pilot Arc Controller, Heavy-duty work clamp, and Ergonomic ICE-27C torch, the Spectrum 375 CutMate is the clear winner in its class.




 

Features:
  • Pilot Arc Controller increases cutting capabilities and speeds, and improves tip life.
  • Capable of Drag Cutting quality cut (approx. 7 IPM) at 3/8" mild steel.  Stand Off quality cut (approx. 7 IPM) at 1/2" mild steel.
  • Power Factor Correction expands operator's work area via extension cords with less nuisance tripping than previous model.  Allows the Spectrum 375 CutMate to use up to 50 ft of 12 AWG extension cord on 115V, 20 Amp service and to draw 20% less current when cutting and than the previous model.
  • Increased Line Voltage Compensation regulates input power to a fixed value as line voltage droops or spikes by +/- 15% for steadier cuts and cleaner ending cuts.
  • Advanced Flashing LED indicators for pressure, power, cup and temperature allow faster troubleshooting eliminating unnecessary downtime.
  • Ergonomic design of ICE-27C torch with increased comfort, safety trigger, and improved swirl ring and cup.  Also, accepts consumables from prior ICE-25C model torch.
  • Dual input voltage located in back of units allows either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position.  Unit provides full cutting capacity when powered by most engine-driven welders with 240 VAC auxiliary receptacles.
  • Compatible with engine-driven welders capable of cutting 3/8 to 1/2 in mild steel when powered by a Miller engine-driven welder with 6000 watts, 240 V receptacle.
  • Starts without high-frequency so it will not interfere with controls or computers.
  • Postflow cooling circuit extends the life of the consumables and torch by cooling them with postflow air after the trigger is released.
  • Consumables storage compartment provides convenient access to consumables and parts.
  • Gas/air filter/regulator inside the power source provides added protection during transportation.  Standard air connection on back panel for easy gas or air hookup.


 



 

Miller Exclusives:
  • LVC Line Voltage Compensation - Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
  • Blow Back Torch Design - The plasma arc is created by pulling an electrical arc between an electrode and tip.  This process eliminates high frequency by forcing an electrical arc between the two pieces.
  • Post Flow Cooling Circuit - Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.


 



 

Processes:
  • Air Plasma Cutting


 



 

Comes Complete With:
  • Plasma cutter.
  • ICE-27C hand-held torch with 20 ft cable. (accepts consumables from prior ICE-25C) model torch.
  • 15 ft HEAVY-DUTY work cable with clamp.
  • Extra consumables (3 electrodes, 3 tips, and 1 air fitting).
  • 10 ft power cord with 115 VAC, 20 A plug.
  • Easy-to-connect, built-in gas/air filter and regulator with extra protection.

 


 



 

Accessories: EXTRA
  • ICE- 27C:  20 ft. hand held replacement torch.  Part # 195014.
  • MG Air Filter:  Part # 042306.
  • Replacement Element:  4 per pack.  Part # 042312.
  • Cable Cover 30 ft:  Protects hoses and cables. Feature nonconductive zipper and is easily removed if necessary. 30 ft (9 m) standard length can be cut to size.  Part # 118678.
  • Guide, Roller Plasma Torch:  For ICE 12C, 27C, 40C, 50C, 55C, 80C.  Part # 194883.
  • No. 30B Economy Cart with Corp Wrap:  This economical running gear provides mobility with an angle for easy front panel access and extra storage space.   Part # 300511.
  • Protective Cover:  For Spectrum Thunder and Spectrum 375  Part # 195144.
  • RTI Air Filter / Dryer:  Part # 195188.
  • Suction/Magnetic Pivot Base:  Add this to your cutting guide for convenient attachment to all flat surfaces. The extended arm accommodates holes up to 30 in diameter.  Part # 195979.
  • Plasma Circle-Cutting Guides:  For ICE-12C, 25C, 50C, 55C, and 80C - Cut straight lines or circles up to 12 inches in diameter.  Part # 195981.


 




 

Machine Specifications
Stock Number Rated Output Max.
Open-
Circuit
Voltage
Amps Input at Rated Output, 60 Hz. Dimensions Net Weight
120 V 230 V KVA KW

903 891

115 V, 60 Hz.

12 A at 110 VDC 325 VDC 20 ----- 2.4 2.0 H: 16"
  (406 mm)

W: 8.5"
  (216 mm)

D: 16"
  (406 mm)
43 lbs
(20 kgs)
230 V,60HZ ----- 10 2.3 1.9 51 lbs
(23 kgs)
 
 


B & R WELDER REPAIR SERVICE INC.
4412 SOUTHERN BUSINESS PARK DRIVE
WHITE PLAINS, MD 20695
800-783-3073    FAX 301-934-3057
Hours : Mon-Fri 8-5   Sat 9-12 EST
    Email questions to : 
                                     

 All products are brand new , not rebuilt ,not reconditioned and carry a full manufactures warranty.
 Unless otherwise specified




Payment Paypal, all major credit cards. Payment must be received within 5 days of purchase.
Fees Maryland  sales tax of 6 % charged on all orders shipped to or picked up in Maryland.
Shipping Most items include free shipping to 48 states, check listing for the FREE SHIPPING. . Large welders require truck shipment to your door. You must get them off the truck.We can arrange for a lift gate if you request it. A daytime phone number is required  .Some one must be there for truck freight deliveries.  We ship all items under 110# UPS or FexEx ground service. You can choose1st OR 2nd day at additional charge, send email or call for cost. WE DO  SHIP VIA USPS for  items under 70 lbs,  to an APO box which there is a $ 15-$ 75 surcharge on all items. We will not ship to a freight fowarder unless other payment arrangements are made , no credit cards on orders to freight fowarders or third party shippers.
Delivery We will usually ship your item the same day or next business day after receiving payment. Some weekend and holiday purchases may go out on Monday or Tuesday do to heavy volume. You will be notified immediatly if your item is on back-order. Some listing clearly list lead time for delivery, read carefully. .
Warranty
All warranties are thru the manufacturer
Contact Me Email brwelder@radix.net  Phone 800-783-3073 5 DAYS A WEEK 8:00 AM - 5:00 PM EST And Sat  9-12. Some questions and special shipping requirements may take a day or so. We try to return all calls during business hours within one hour or less. Emails sometimes can take a little longer, but will be answered as fast as we can.
Warranty   - All warranties are thru the manufacturers. We will help you with calling the manufacturer or  receipts.





We are an AUTHORIZED MILLER - HOBART - ONAN - ACE FUME ECTRACTORS - ARCAIR DISTRIBUTOR.
We have been serving the welding industry for over 25 years. So buy with confidence! B & R  Welding
 Supplies is family owned and operated. You can speak with a real person at any time for technical
questions or help in the application processes.
Free Shipping to the lower 48 stateson most items  

We accept  credit cards and PayPal either thru Ebay or directly .   Feel free to call our office direct
 at 1-800-783-3073 to use your credit card and speak with a live person Monday through Friday 8AM to 5PM 
and Sat 9 AM to 12 PM EST .

Online payment are by Visa , MasterCard,Discover , American Express , or PayPal.  B & R  only accepts U.S. billed
 credit cards, and requires both a billing address & V-code verification in order to accept a credit card. No C.O.D.
orders or “purchase orders” are accepted. On Paypal we only ship to a verified Paypal address . You can set up a
second paypal address for shipments , this must be verified by Paypal.

B & R  requires signature on all machines, as well as packages with a total value exceeding $500. You may
 request that your delivery signature requirement be waived by entering a special request in the the form of
an email to brwelder@radix.net  .  B & R  cannot take responsibility for missing or damaged packages delivered
 without a signature at the request of the customer.

External damage to all packages must be refused and B & R must be contacted immediately. Internal damage
must be reported to B & R  within 5 days of receipt. Damage claims will be refused if the item has been used, is
 not in original packaging, or was received more than 5 days earlier.

A 6 % Sales tax for customers is charged to Maryland shipping addresses only.

Alaska or Hawaii Shipments:
GROUND UNDER 100 lbs.
- shipping charges will be quoted separately via phone or email.
AIR UNDER 150 lbs. - MUST ship either Next Day or Second Day Air and shipping charges
GROUND OR AIR OVER 150 lbs. - shipping charges will be quoted separately via phone or email.

B & R does not ship to Canada .

B & R cannot ship to a P.O. Box , we need a physical address  to ship to , by not providing
one delays your order .

Air/Express Shipments: Next Day, Second Day or Three Day Air, on orders UNDER 100 lbs 
will be quoted separately via phone or email.   800-783-3073 .

B & R  Welding Supplies is located at 4412 Southern Business Park Drive , White Plains, Maryland, 20695 . 
Fax  301-934-3057  - Phone  800-783-3073 --  email brwelder@radix.net & brweldingsupplies@yahoo.com .


Powered by
The free listing tool. List your items fast and easy and manage your active items.
MILLER SPECTRUM 375 PLASMA CUTTER 903891


To bid on or purchase this item click here.
©2010 WeldingList.com | contact: